Description

Thermo-Radiata Pine outside corner trim gives your sauna's exterior corners a clean, finished edge while matching the surrounding wall material. The thermally modified Radiata Pine shares the same dimensional stability and moisture resistance as the cladding it borders, so expansion and contraction stay consistent across the entire surface.

Cut to a 1x2 profile (21mm × 42mm), each piece is sized to cover a standard outside corner junction neatly without adding bulk. Available in eight lengths from 1 foot through 8 feet, you can select exactly what the run requires and minimize waste on the job site.

Key Features

• Thermally modified Radiata Pine — the heat-treatment process reduces the wood's ability to absorb moisture, making it more dimensionally stable in the humid cycling environment of a sauna.
• 1x2 profile (21mm × 42mm) — a slim footprint that caps outside corners flush without projecting into the room or disrupting panel alignment.
• Outside corner geometry — the profile is milled specifically for exterior corner applications, giving you clean sightlines where two wall surfaces meet.
• Eight length options (1 ft – 8 ft) — ordering by the foot lets you match actual corner heights and minimize on-site cutting and material waste.

1'

• 292mm finished length — suited for short accent runs or filler sections

2'

• Two-foot length for low partition corners or benching details

3'

• Three-foot length for mid-height corner sections

4'

• Four-foot length covers roughly half a standard wall height in a single piece

5'

• Five-foot length for non-standard wall heights without splicing

6'

• Six-foot length spans most residential sauna wall heights in one unbroken run

7'

• Seven-foot length accommodates taller walls while keeping seam count low

8'

• Eight-foot length for full-height coverage in a single piece, eliminating mid-corner joints entirely

SHIPPING & DELIVERY

Sauna wood is not free shipping. Length, piece count, profile, and weight set the rate. These are the Bathing Brands contiguous-US flat rates. Canada is the same table plus $100. Alaska, Hawaii, and remote addresses are quoted.

Checkout charges the 8' piece-count table (contiguous US). Canada is the same table plus $100. Boards over 8' use that same checkout rate; dock or liftgate extras are a follow-up. Alaska, Hawaii, and remote addresses are quoted.

BOARDS UP TO 8'

Under 40 pieces generally ships FedEx Ground in cardboard. Over 40 pieces generally ships LTL with a liftgate on a wood pallet. The longest board in the order sets the rate tier.

• Under 19 boards — $195
• 20–39 boards — $395
• 40–99 boards — $495
• 100–299 boards — $695
• 300–499 boards — $895
• 500–799 boards — $995
• 800–999 boards — $1,295

BOARDS OVER 8' UP TO 10'

These lengths ship LTL on a wood pallet. They do not qualify for a liftgate — you need a dock, machinery, or hand offload on site. Carriers allow about one hour to unload before extra fees.

• Under 19 boards — $295
• 20–39 boards — $495
• 40–99 boards — $595
• 100–299 boards — $795
• 300–499 boards — $995
• 500–799 boards — $1,095
• 800–999 boards — $1,395

HOW THIS SHIPS

• We pack for a safe arrival at the lowest rate that fits the order.
• Boards over 8' carry a surcharge because long crates cost more to move than a standard skid.
• Heaters, doors, or accessories on the same order can offset some of that freight.