Description

Thermo-Aspen Grace™ 2x3 tongue-and-groove panelling brings a considered approach to sauna wall and ceiling finishing. The thermally modified aspen profile measures 27mm × 64mm and features the Grace large-gap pattern, which spaces boards to allow deliberate shadow lines and improved air movement across the surface.

Thermally modified aspen has had its natural moisture and resin content reduced through a heat treatment process, making the wood more dimensionally stable in the wet-dry cycles of a sauna environment and less prone to warping or checking over time. The tongue-and-groove profile locks boards edge to edge for a clean, consistent face without exposed fasteners.

Available in five lengths — 1, 6, 7, 8, and 10 foot — the range lets you plan your layout to minimise waste for the specific dimensions of your sauna room.

Key Features

• Thermally modified aspen: the heat treatment process reduces the wood's equilibrium moisture content, so boards expand and contract less dramatically through sauna heating and cooling cycles.
• 27mm × 64mm (2×3) profile: the added thickness compared with thinner profiles gives each board more rigidity across longer spans, reducing flex between fastening points.
• Grace large-gap pattern: the wider spacing between boards creates defined shadow lines and allows air to circulate behind the panelling surface, supporting even drying after each session.
• Tongue-and-groove joinery: boards interlock along their edges so the installation face stays uniform and fasteners can be hidden in the groove, keeping the finished surface clean.
• Five length options (1, 6, 7, 8, and 10 ft): ordering lengths close to your wall or ceiling run reduces the number of end joints and the overall material waste on site.

1'

• 292mm boards are suited to accent borders, trim courses, or small feature sections where full-length planks would require excessive cutting.

6'

• A 6-foot length works well in compact sauna rooms where walls are shorter and a single board can run the full height without a horizontal joint.

7'

• 7-foot boards suit standard residential ceiling heights, allowing a single unjointed run from floor to ceiling on most interior wall installations.

8'

• 8-foot lengths align with common stud spacing and sheet-good dimensions, making layout planning and waste calculation straightforward.

10'

• 10-foot boards are suited to larger custom sauna rooms or horizontal installations where longer continuous runs are needed to avoid mid-wall joints.

SHIPPING & DELIVERY

Sauna wood is not free shipping. Length, piece count, profile, and weight set the rate. These are the Bathing Brands contiguous-US flat rates. Canada is the same table plus $100. Alaska, Hawaii, and remote addresses are quoted.

Checkout charges the 8' piece-count table (contiguous US). Canada is the same table plus $100. Boards over 8' use that same checkout rate; dock or liftgate extras are a follow-up. Alaska, Hawaii, and remote addresses are quoted.

BOARDS UP TO 8'

Under 40 pieces generally ships FedEx Ground in cardboard. Over 40 pieces generally ships LTL with a liftgate on a wood pallet. The longest board in the order sets the rate tier.

• Under 19 boards — $195
• 20–39 boards — $395
• 40–99 boards — $495
• 100–299 boards — $695
• 300–499 boards — $895
• 500–799 boards — $995
• 800–999 boards — $1,295

BOARDS OVER 8' UP TO 10'

These lengths ship LTL on a wood pallet. They do not qualify for a liftgate — you need a dock, machinery, or hand offload on site. Carriers allow about one hour to unload before extra fees.

• Under 19 boards — $295
• 20–39 boards — $495
• 40–99 boards — $595
• 100–299 boards — $795
• 300–499 boards — $995
• 500–799 boards — $1,095
• 800–999 boards — $1,395

HOW THIS SHIPS

• We pack for a safe arrival at the lowest rate that fits the order.
• Boards over 8' carry a surcharge because long crates cost more to move than a standard skid.
• Heaters, doors, or accessories on the same order can offset some of that freight.