Description

Thermo-Aspen bench boards are kiln-treated aspen milled to a true 2x6 profile (28mm × 140mm) with smooth faces and eased edges on all four sides. That S4SEE finish means no rough corners to catch skin during a session — an important detail on a surface you sit and recline against for extended periods.

We carry this board in four lengths — 1', 7', 8', and 10' — so you can cut waste to a minimum whether you are building a single-tier bench in a compact room or a full multi-tier layout in a larger space. Ordering the length closest to your finished dimension reduces field cuts and keeps the grain pattern consistent across the run.

Key Features

• Thermo-treated aspen — heat processing drives out resins and reduces moisture absorption, which keeps the board surface cooler to the touch and more dimensionally stable under the wet-dry cycles inside a sauna.
• True 2x6 dimensions (28mm × 140mm) — a consistent cross-section means boards sit flush against each other and support even weight distribution across the bench frame.
• Smooth 4 Sides, Eased Edges (S4SEE) — factory-finished on every face so the board is ready to install without additional sanding, and the relieved edges eliminate the sharp arrises that cause discomfort against bare skin.
• Four length options (1', 7', 8', 10') — matching board length to your bench run reduces the number of joints in the finished surface, which improves both appearance and long-term structural integrity.

1'

• Short off-cut length suited to filling gaps, stair nosings, or accent details without wasting a full board.

7'

• Works well in rooms where standard 8' boards would require trimming, reducing scrap on modestly sized benches.

8'

• Common choice for single-run bench spans in typical sauna room widths, minimising mid-span joints.

10'

• Longer length accommodates wider rooms or L-shaped bench layouts without an additional butt joint along the run.

SHIPPING & DELIVERY

Sauna wood is not free shipping. Length, piece count, profile, and weight set the rate. These are the Bathing Brands contiguous-US flat rates. Canada is the same table plus $100. Alaska, Hawaii, and remote addresses are quoted.

Checkout charges the 8' piece-count table (contiguous US). Canada is the same table plus $100. Boards over 8' use that same checkout rate; dock or liftgate extras are a follow-up. Alaska, Hawaii, and remote addresses are quoted.

BOARDS UP TO 8'

Under 40 pieces generally ships FedEx Ground in cardboard. Over 40 pieces generally ships LTL with a liftgate on a wood pallet. The longest board in the order sets the rate tier.

• Under 19 boards — $195
• 20–39 boards — $395
• 40–99 boards — $495
• 100–299 boards — $695
• 300–499 boards — $895
• 500–799 boards — $995
• 800–999 boards — $1,295

BOARDS OVER 8' UP TO 10'

These lengths ship LTL on a wood pallet. They do not qualify for a liftgate — you need a dock, machinery, or hand offload on site. Carriers allow about one hour to unload before extra fees.

• Under 19 boards — $295
• 20–39 boards — $495
• 40–99 boards — $595
• 100–299 boards — $795
• 300–499 boards — $995
• 500–799 boards — $1,095
• 800–999 boards — $1,395

HOW THIS SHIPS

• We pack for a safe arrival at the lowest rate that fits the order.
• Boards over 8' carry a surcharge because long crates cost more to move than a standard skid.
• Heaters, doors, or accessories on the same order can offset some of that freight.