Hemlock 1x4 Vertical Grain Board

Description

This is vertical-grain hemlock milled to a true 1x4 profile with all four sides smooth and edges eased — a combination that matters when the wood will be seen and touched every session. Vertical grain runs parallel to the board face, which means the growth rings are oriented to resist cupping and warping as the wood cycles through heat and moisture.

The S4SEE (smooth four sides, eased edges) mill finish means no additional planing or sanding is needed before installation. Eased edges produce a clean shadow line between boards and eliminate the sharp arrises that rough-milled lumber leaves behind. Available in eight lengths — 1, 3, 4, 5, 6, 7, 8, and 10 feet — so you can plan your layout with minimal waste regardless of wall or bench run.

Key Features

• Vertical-grain orientation resists cupping and warping across repeated heat-and-humidity cycles, keeping walls and benches flat over time.
• Clear grade hemlock — no knots or defects that could create weak points or uneven heat transfer in a finished surface.
• S4SEE mill finish (smooth four sides, eased edges) arrives ready to install without additional surfacing work.
• Eased edges create consistent, clean shadow lines between adjacent boards for a refined finished appearance.
• Eight length options (1 ft through 10 ft) let you plan cuts and minimize offcuts for your specific layout.

1'

• Ideal for short fills, blocking, and detail work where longer boards would produce excessive waste.

3'

• Useful for accent walls, small panels, or areas with frequent blocking requirements.

4'

• A practical mid-length for standard bench framing and lower wall sections.

5'

• Suits many bench-top and wall runs without the handling challenges of longer stock.

6'

• A common choice for full-height wall paneling in compact sauna cabins.

7'

• Accommodates taller wall heights with fewer horizontal seams.

8'

• Spans standard interior wall heights in a single board, reducing joint lines.

10'

• Covers longer uninterrupted runs on walls, ceilings, or benches with the fewest seams possible.

SHIPPING & DELIVERY

Sauna wood is not free shipping. Length, piece count, profile, and weight set the rate. These are the Bathing Brands contiguous-US flat rates. Canada is the same table plus $100. Alaska, Hawaii, and remote addresses are quoted.

Checkout charges the 8' piece-count table (contiguous US). Canada is the same table plus $100. Boards over 8' use that same checkout rate; dock or liftgate extras are a follow-up. Alaska, Hawaii, and remote addresses are quoted.

BOARDS UP TO 8'

Under 40 pieces generally ships FedEx Ground in cardboard. Over 40 pieces generally ships LTL with a liftgate on a wood pallet. The longest board in the order sets the rate tier.

• Under 19 boards — $195
• 20–39 boards — $395
• 40–99 boards — $495
• 100–299 boards — $695
• 300–499 boards — $895
• 500–799 boards — $995
• 800–999 boards — $1,295

BOARDS OVER 8' UP TO 10'

These lengths ship LTL on a wood pallet. They do not qualify for a liftgate — you need a dock, machinery, or hand offload on site. Carriers allow about one hour to unload before extra fees.

• Under 19 boards — $295
• 20–39 boards — $495
• 40–99 boards — $595
• 100–299 boards — $795
• 300–499 boards — $995
• 500–799 boards — $1,095
• 800–999 boards — $1,395

HOW THIS SHIPS

• We pack for a safe arrival at the lowest rate that fits the order.
• Boards over 8' carry a surcharge because long crates cost more to move than a standard skid.
• Heaters, doors, or accessories on the same order can offset some of that freight.