Thermo-Radiata Pine 2x6 Bench Board

Description

Thermo-Radiata Pine bench boards are thermally modified to drive out moisture and resins, producing a stable, splinter-resistant surface that holds up to the heat cycles of a working sauna. The 2x6 profile — finished at 26mm × 140mm — gives you a comfortable seating depth without unnecessary bulk.

Each board arrives S4SEE: smooth on all four sides with eased edges. That means no sharp corners against bare skin and no additional sanding required before installation. Available in lengths from 1 foot through 10 feet, so you can cut waste to a minimum regardless of your bench layout.

Key Features

• Thermally modified Radiata Pine — the heat treatment reduces moisture content and resin activity, keeping the wood dimensionally stable and cool to the touch even at high sauna temperatures.
• 26mm × 140mm finished dimensions (S4SEE profile) — four smooth faces and eased edges mean the board is ready to install without additional planing or sanding.
• Eased edges protect skin contact points — the subtle rounding along each long edge removes the sharpness that rough-cut lumber would leave on bench surfaces.
• Ten length options (1 ft – 10 ft) — ordering closer to your finished cut length reduces offcuts and keeps material costs predictable.

1'

• 292mm finished length — useful for short infill sections or narrow bench returns

2'

• Approximately 610mm finished length

3'

• Approximately 915mm finished length

4'

• Approximately 1220mm finished length

5'

• Approximately 1525mm finished length

6'

• Approximately 1830mm finished length — a common span for single-wall bench runs

7'

• Approximately 2135mm finished length

8'

• Approximately 2440mm finished length — suits longer continuous bench runs with fewer joints

9'

• Approximately 2745mm finished length

10'

• Approximately 3050mm finished length — maximises span between supports and minimises visible seams on large benches

SHIPPING & DELIVERY

Sauna wood is not free shipping. Length, piece count, profile, and weight set the rate. These are the Bathing Brands contiguous-US flat rates. Canada is the same table plus $100. Alaska, Hawaii, and remote addresses are quoted.

Checkout charges the 8' piece-count table (contiguous US). Canada is the same table plus $100. Boards over 8' use that same checkout rate; dock or liftgate extras are a follow-up. Alaska, Hawaii, and remote addresses are quoted.

BOARDS UP TO 8'

Under 40 pieces generally ships FedEx Ground in cardboard. Over 40 pieces generally ships LTL with a liftgate on a wood pallet. The longest board in the order sets the rate tier.

• Under 19 boards — $195
• 20–39 boards — $395
• 40–99 boards — $495
• 100–299 boards — $695
• 300–499 boards — $895
• 500–799 boards — $995
• 800–999 boards — $1,295

BOARDS OVER 8' UP TO 10'

These lengths ship LTL on a wood pallet. They do not qualify for a liftgate — you need a dock, machinery, or hand offload on site. Carriers allow about one hour to unload before extra fees.

• Under 19 boards — $295
• 20–39 boards — $495
• 40–99 boards — $595
• 100–299 boards — $795
• 300–499 boards — $995
• 500–799 boards — $1,095
• 800–999 boards — $1,395

HOW THIS SHIPS

• We pack for a safe arrival at the lowest rate that fits the order.
• Boards over 8' carry a surcharge because long crates cost more to move than a standard skid.
• Heaters, doors, or accessories on the same order can offset some of that freight.