Thermo-Aspen 1x5 Nickel-Gap Tongue & Groove Paneling

Description

Thermo-Aspen 1x5 Nickel-Gap Tongue & Groove Paneling brings a clean, contemporary profile to sauna walls and ceilings. The nickel-gap reveal creates a subtle shadow line between each board, giving finished surfaces a deliberate, architectural look rather than a flush-butted appearance.

Thermo-aspen is heat-treated to reduce the wood's natural moisture content and resin activity, which means the boards remain more dimensionally stable through the repeated wet-dry cycles of sauna use. The 1x5 nominal profile — measuring 15 mm thick by 120 mm wide — offers a substantial feel underhand while keeping individual boards light enough for straightforward single-person installation. Tongue and groove milling locks each course in alignment and distributes any seasonal movement evenly across the wall.

Boards are available in five lengths — 1, 6, 7, 8, and 10 feet — so you can order to match your bench runs, wall heights, or ceiling spans and keep cut waste to a minimum.

Key Features

• Thermo-treated aspen: heat processing stabilizes the wood against the moisture and temperature swings inside a sauna, reducing warping and checking over time.
• Nickel-gap profile: the small reveal between installed boards creates a defined shadow line, giving walls and ceilings a clean, modern finish.
• 1x5 nominal dimension (15 mm × 120 mm): thick enough to feel solid, narrow enough to flex around curved or angled layouts without excessive waste.
• Tongue and groove milling: interlocking edges keep every board flush and in plane, so the surface stays true even as the wood moves with humidity changes.
• Five available lengths (1 ft, 6 ft, 7 ft, 8 ft, 10 ft): ordering the length closest to your wall height or ceiling run reduces on-site cutting and offcut waste.

1'

• 292 mm length suits accent rows, border details, or small fill sections where longer boards would produce excessive waste.

6'

• Practical for standard bench-height wall sections and horizontal runs in smaller sauna cabins.

7'

• Matches common 7-foot interior ceiling heights, allowing full-length vertical runs with a single board and no horizontal seam.

8'

• Aligns with standard 8-foot stud height, making it efficient for vertical paneling in rooms framed to typical residential dimensions.

10'

• Suits taller ceilings or long horizontal feature walls where fewer end joints keep the surface visually uninterrupted.

SHIPPING & DELIVERY

Sauna wood is not free shipping. Length, piece count, profile, and weight set the rate. These are the Bathing Brands contiguous-US flat rates. Canada is the same table plus $100. Alaska, Hawaii, and remote addresses are quoted.

Checkout charges the 8' piece-count table (contiguous US). Canada is the same table plus $100. Boards over 8' use that same checkout rate; dock or liftgate extras are a follow-up. Alaska, Hawaii, and remote addresses are quoted.

BOARDS UP TO 8'

Under 40 pieces generally ships FedEx Ground in cardboard. Over 40 pieces generally ships LTL with a liftgate on a wood pallet. The longest board in the order sets the rate tier.

• Under 19 boards — $195
• 20–39 boards — $395
• 40–99 boards — $495
• 100–299 boards — $695
• 300–499 boards — $895
• 500–799 boards — $995
• 800–999 boards — $1,295

BOARDS OVER 8' UP TO 10'

These lengths ship LTL on a wood pallet. They do not qualify for a liftgate — you need a dock, machinery, or hand offload on site. Carriers allow about one hour to unload before extra fees.

• Under 19 boards — $295
• 20–39 boards — $495
• 40–99 boards — $595
• 100–299 boards — $795
• 300–499 boards — $995
• 500–799 boards — $1,095
• 800–999 boards — $1,395

HOW THIS SHIPS

• We pack for a safe arrival at the lowest rate that fits the order.
• Boards over 8' carry a surcharge because long crates cost more to move than a standard skid.
• Heaters, doors, or accessories on the same order can offset some of that freight.