Description

These aspen bench boards are milled to a 2x6 profile (28mm x 140mm) with smooth four-sides eased-edge (S4SEE) finishing. That means every face and edge is planed flat and the corners are gently relieved — so bare skin never meets a sharp arris, and the surface is ready to use without additional sanding.

Aspen is a traditional Nordic sauna wood prized for its low resin content, which keeps the surface from becoming sticky or discoloring under heat. Its tight, pale grain also stays relatively cool to the touch even in high-temperature environments, making it a practical choice for seating and backrest surfaces. Available in 1-foot, 8-foot, and 10-foot lengths so you can plan cuts efficiently and minimize waste for your specific bench layout.

Key Features

• 2x6 nominal profile (28mm x 140mm) — a substantial bench depth that supports comfortable seating without requiring additional framing width.
• Smooth 4 sides, eased edges (S4SEE) — all faces are machine-planed and corners are lightly relieved so the board is safe against bare skin straight from the pack.
• Aspen species — naturally low resin content means no sticky residue or dark pitch staining on skin or towels when the sauna reaches temperature.
• Pale, close grain stays relatively cool to the touch, reducing the risk of surface burns on contact points like thighs and backs.
• Available in three lengths (1 ft, 8 ft, 10 ft) — mix lengths to reduce off-cuts and tailor your order to your bench plan.

1'

• 292mm finished length — useful for short infill sections, risers, or prototyping your bench layout before cutting longer boards.

8'

• Standard length suitable for most residential bench runs with minimal joining.

10'

• Longer board for extended benches or commercial installations where fewer end-joints are preferred.

SHIPPING & DELIVERY

Sauna wood is not free shipping. Length, piece count, profile, and weight set the rate. These are the Bathing Brands contiguous-US flat rates. Canada is the same table plus $100. Alaska, Hawaii, and remote addresses are quoted.

Checkout charges the 8' piece-count table (contiguous US). Canada is the same table plus $100. Boards over 8' use that same checkout rate; dock or liftgate extras are a follow-up. Alaska, Hawaii, and remote addresses are quoted.

BOARDS UP TO 8'

Under 40 pieces generally ships FedEx Ground in cardboard. Over 40 pieces generally ships LTL with a liftgate on a wood pallet. The longest board in the order sets the rate tier.

• Under 19 boards — $195
• 20–39 boards — $395
• 40–99 boards — $495
• 100–299 boards — $695
• 300–499 boards — $895
• 500–799 boards — $995
• 800–999 boards — $1,295

BOARDS OVER 8' UP TO 10'

These lengths ship LTL on a wood pallet. They do not qualify for a liftgate — you need a dock, machinery, or hand offload on site. Carriers allow about one hour to unload before extra fees.

• Under 19 boards — $295
• 20–39 boards — $495
• 40–99 boards — $595
• 100–299 boards — $795
• 300–499 boards — $995
• 500–799 boards — $1,095
• 800–999 boards — $1,395

HOW THIS SHIPS

• We pack for a safe arrival at the lowest rate that fits the order.
• Boards over 8' carry a surcharge because long crates cost more to move than a standard skid.
• Heaters, doors, or accessories on the same order can offset some of that freight.