Alder 1x4 Nickel-Gap Tongue & Groove Paneling

Description

This alder tongue-and-groove paneling is milled to a 1x4 profile (15mm × 90mm) with a nickel-gap reveal, meaning each board seats firmly into the next while leaving a narrow shadow line between faces. That gap does two things in a sauna environment: it gives the wood room to expand and contract with heat cycles without buckling, and it creates a clean, linear aesthetic that reads as intentional craftsmanship rather than a construction gap.

Alder is a traditional sauna wood chosen for its low resin content and relatively low thermal mass — it heats up quickly and stays comfortable to the touch even at high bench-level temperatures. The STS4 tongue-and-groove profile locks boards edge-to-edge so fasteners can be hidden through the tongue, keeping the finished wall or ceiling surface completely clear of visible nail heads.

Key Features

• STS4 nickel-gap profile creates a recessed shadow line between boards, adding visual texture and allowing for natural wood movement during humidity and heat cycles.
• Alder species stays cooler to the touch than denser hardwoods, an important comfort consideration for surfaces at bench and wall height inside a sauna.
• Tight, consistent grain with minimal resin content means you won't see sap bleed or sticky spots develop on the surface as the sauna heats up.
• Actual dimensions of 15mm × 90mm (nominal 1x4) give a fine-scaled, traditional paneling look suited to both sauna walls and ceilings.
• Standard tongue-and-groove milling locks adjacent boards together for a stable, uniform surface with no face fasteners required on the field.
• Available in ten lengths (1 ft through 10 ft) so you can match board length to your layout and minimize offcuts.

1'

• 292mm board length — useful for short-run infill, borders, or accent courses where longer boards would produce excessive waste.

2'

• Suited to compact wall sections or ceiling soffits where a mid-length board reduces unnecessary cutting.

3'

• A practical length for smaller sauna cabins or for running boards vertically on walls with limited floor-to-ceiling height.

4'

• Covers a standard stud bay in a single run, reducing seams on wall fields and simplifying installation layout.

5'

• Balances handleability with coverage, a common choice for ceiling runs in compact two-person saunas.

6'

• Works well for horizontal wall paneling in saunas with standard 6 ft bench-height wall sections.

7'

• A versatile length for full-height vertical paneling in saunas with 7 ft ceilings.

8'

• Covers a full 8 ft wall height in a single vertical board, eliminating horizontal seams on tall sauna walls.

9'

• Accommodates taller sauna enclosures or long horizontal ceiling runs where fewer end-joints improve the finished appearance.

10'

• Maximum available length; minimizes end-joints on large sauna walls or ceilings, producing a cleaner, more continuous look.

SHIPPING & DELIVERY

Sauna wood is not free shipping. Length, piece count, profile, and weight set the rate. These are the Bathing Brands contiguous-US flat rates. Canada is the same table plus $100. Alaska, Hawaii, and remote addresses are quoted.

Checkout charges the 8' piece-count table (contiguous US). Canada is the same table plus $100. Boards over 8' use that same checkout rate; dock or liftgate extras are a follow-up. Alaska, Hawaii, and remote addresses are quoted.

BOARDS UP TO 8'

Under 40 pieces generally ships FedEx Ground in cardboard. Over 40 pieces generally ships LTL with a liftgate on a wood pallet. The longest board in the order sets the rate tier.

• Under 19 boards — $195
• 20–39 boards — $395
• 40–99 boards — $495
• 100–299 boards — $695
• 300–499 boards — $895
• 500–799 boards — $995
• 800–999 boards — $1,295

BOARDS OVER 8' UP TO 10'

These lengths ship LTL on a wood pallet. They do not qualify for a liftgate — you need a dock, machinery, or hand offload on site. Carriers allow about one hour to unload before extra fees.

• Under 19 boards — $295
• 20–39 boards — $495
• 40–99 boards — $595
• 100–299 boards — $795
• 300–499 boards — $995
• 500–799 boards — $1,095
• 800–999 boards — $1,395

HOW THIS SHIPS

• We pack for a safe arrival at the lowest rate that fits the order.
• Boards over 8' carry a surcharge because long crates cost more to move than a standard skid.
• Heaters, doors, or accessories on the same order can offset some of that freight.