Description

This inside corner trim is milled from alder and sized at 1x2 (14mm x 30mm) to cover the interior angles where sauna walls meet. A clean corner finish matters because exposed panel edges can catch moisture and show movement over time — trim locks them in place and gives the interior a deliberate, finished appearance.

Available in eight lengths from 1 foot (292mm) through 8 feet, you can select exactly what each corner run requires and minimize on-site cutting. Ordering to length keeps waste low and ensures the grain profile reads consistently across the full height of the wall.

Key Features

• Milled from alder — a traditional sauna wood valued for its stable, low-resin character that holds up in the heat and humidity of a sauna environment.
• 1x2 profile (14mm x 30mm) seats cleanly into inside corners, concealing panel edges and preventing moisture from working into exposed end grain.
• Inside corner geometry means a single piece handles the full angle where two walls meet, eliminating the need to miter-cut standard trim on site.
• Eight length options (1 ft through 8 ft) let you match trim runs precisely to your wall height, reducing waste and keeping seams to a minimum.

1'

• 292mm length — suited to short accent runs, window returns, or filling gaps between longer pieces.

2'

• Covers low wainscot sections or horizontal corner breaks where a full-length board is not needed.

3'

• Useful for bench-height corner transitions or partial-wall applications.

4'

• Covers roughly half a standard wall height in a single piece, limiting the number of joints on shorter walls.

5'

• A practical mid-range length for walls in the 5 ft range or for splitting taller runs with a single seam.

6'

• Covers most standard sauna wall heights in one continuous piece, keeping the corner line uninterrupted.

7'

• Suited to slightly taller interiors where a 6 ft piece would fall short and require an added filler section.

8'

• Full 8 ft length handles tall sauna walls floor to ceiling without a seam, giving the cleanest possible corner finish.

SHIPPING & DELIVERY

Sauna wood is not free shipping. Length, piece count, profile, and weight set the rate. These are the Bathing Brands contiguous-US flat rates. Canada is the same table plus $100. Alaska, Hawaii, and remote addresses are quoted.

Checkout charges the 8' piece-count table (contiguous US). Canada is the same table plus $100. Boards over 8' use that same checkout rate; dock or liftgate extras are a follow-up. Alaska, Hawaii, and remote addresses are quoted.

BOARDS UP TO 8'

Under 40 pieces generally ships FedEx Ground in cardboard. Over 40 pieces generally ships LTL with a liftgate on a wood pallet. The longest board in the order sets the rate tier.

• Under 19 boards — $195
• 20–39 boards — $395
• 40–99 boards — $495
• 100–299 boards — $695
• 300–499 boards — $895
• 500–799 boards — $995
• 800–999 boards — $1,295

BOARDS OVER 8' UP TO 10'

These lengths ship LTL on a wood pallet. They do not qualify for a liftgate — you need a dock, machinery, or hand offload on site. Carriers allow about one hour to unload before extra fees.

• Under 19 boards — $295
• 20–39 boards — $495
• 40–99 boards — $595
• 100–299 boards — $795
• 300–499 boards — $995
• 500–799 boards — $1,095
• 800–999 boards — $1,395

HOW THIS SHIPS

• We pack for a safe arrival at the lowest rate that fits the order.
• Boards over 8' carry a surcharge because long crates cost more to move than a standard skid.
• Heaters, doors, or accessories on the same order can offset some of that freight.